LabTool-48UXP USB
Introduction
The LabTool-48UXP USB is a universal device programmer, which works through your PC's parallel port. It features a 48-pin universal pin driver and an expandable TTL pin driver. It supports over 5600 different devices (including memory, logic and single chip) that's over 11000 devices including different package forms in current software release, new chips are added to the support lists every few months.
Universal pin driver--True universal programming
The LabTool-48UXP features universal pin driver, each pin can supply four different voltage, ground, it also can be configurable as TTL high/low levels with pull-high/pull-low, high-speed clock and high impedance. This advanced pin design lets you program any DIL device of up to 48 pins without needing an adapter.
Unbeatable programming speed
The LabTool-48UXP's on-board intelligence reduces system overhead to a minimum. The LabTool-48UXP has 100% more performance then its predecessor product in program the high density flash chip, it can program a Intel 32 M bit flash chip in less then 60 seconds.
Following is the programming speed example of labtool-48XP
|
|
Intel 28F320C3B
|
AMD 29DL323DB
|
|
Blank check
|
18.6 sec
|
18.9 sec
|
|
Program
|
57.5 sec
|
76.2 sec
|
|
Verify
|
32.5 sec
|
33.0 sec
|
|
Total
|
108.6 sec
|
128.1 sec
|
The LabTool-48XP is much faster than its competitors, making it much more productive with today's high density, multi-megabit memory devices.
